Commercial Catalog

Adrian Steel has the storage products you need, with a nationwide distributor network for professional installation. This catalog will help you set up your work van with the equipment you need to get the job done. Start with a partition to keep your cargo in the cargo area. Choose the shelving and modules for the curb and street side that fit your business needs.

Or, choose a pre-designed trade package to start from. Add the accessories you need to make your van more organized. Carry ladders or cargo on your roof? Check out the variety of ladder and utility racks available. The options are many, so if you don’t know where to start contact your local Adrian Steel distributor for the expert advice you are looking for.

Adrian Steel has the storage products you need, with a nationwide distributor network for professional installation. This catalog will help you set up your work van with the equipment you need to get the job done. Start with a partition to keep your cargo in the cargo area. Choose the shelving and modules for the curb and street side that fit your business needs.

Or, choose a pre-designed trade package to start from. Add the accessories you need to make your van more organized. Carry ladders or cargo on your roof? Check out the variety of ladder and utility racks available. The options are many, so if you don’t know where to start contact your local Adrian Steel distributor for the expert advice you are looking for.

PHVAC Techs need to work in nearly every condition -- on rooftops, in basements and everywhere in-between. We’re designing the perfect upfit packages for your job that include shelving, bins, partitions, and other useful items. These packages will help you be more organized and efficient at your job.

Adrian Steel has the storage products you need, with a nationwide distributor network for professional installation. This catalog will help you set up your work van with the equipment you need to get the job done. Start with a partition to keep your cargo in the cargo area. Choose the shelving and modules for the curb and street side that fit your business needs. Or, choose a pre-designed trade package to start from.

Add the accessories you need to make your van more organized. Carry ladders or cargo on your roof? Check out the variety of ladder and utility racks available. The options are many, so if you don’t know where to start contact your local Adrian Steel distributor for the expert advice you are looking for.

Our aluminum service truck beds offer the most innovative design and superior construction.

Tested in the harshest lab environments, automotive proving grounds and by customers like you, our Aluminum Service Bodies are built to perform. Additionally, military-grade aluminum and structural adhesives that ensure maximum strength and longevity for your work truck.

What does this mean for you? The corrosion resistance of aluminum, an impactful increase in payload and a truck bed as durable as steel. When it comes to Knapheide, lightweight doesn’t mean light duty.

Love the organization capabilities in a utility van, but require a truck chassis for more cab space or four-wheel drive? We’ve designed KUVcc Utility Truck Bodies just for you.

You get all the same great benefits of a KUV, but in a package that’s compatible with a truck cab chassis. With more than enough secure compartments and cargo area storage, the KUVcc can handle all of your tools, equipment and parts while keeping them separated and organized. The KUVcc features solid steel construction so you know you will get years of durable service out of this enclosed utility body.

Productivity and efficiency is vital to your success, so choose a Knapheide KUVcc to add a boost to your bottom line.

With a rugged steel construction and external storage for your tools and equipment, the Service Body is a key component in your day-to-day productivity.

The external compartments offer protection from outside elements and allow technicians to access their equipment without having to climb into the truck bed.

Staying organized both on and between job sites is important. Get maximum efficiency with a Knapheide Service Body.

Knapheide’s Drop Side Dump Body is the premier light duty dump bodies for class three to five chassis. Constructed of high-strength steel for unmatched durability and featuring a crossmemberless understructure for low maintenance and rust prevention, many industries including landscaping, lawn maintenance, construction and municipalities have come to rely on the Knapheide Drop Side Dump Body to safely and efficiently haul and dump bulk materials.

Additionally, all Knapheide Dump Bodies are fully immersed in Knapheide’s electrodeposition prime paint system to ensure corrosion resistance and reliable service. The next time you’re in the market for a light duty dump body, look no further than Knapheide’s Drop Side Dump Body.

Our light-duty dump truck bodies aren’t built “light duty” at all. Knapheide Fixed Side Dump Bodies feature double panel, high-strength steel construction on the sides and tailgate. In addition, choose from a seven gauge or 10 gauge HRCQ steel floor.

Choose from two different styles of understructure, either stacked crossmember or crossmemberless design, depending upon your preference. Utilize the double-acting sub frame hoist for effortless dumping and bulk material spreading applications. Numerous options including underbody toolboxes and packs for secure storage, quarter or full cab shields for protection, manual or electric tarps for retaining material and many others are available to increase the functionality and productivity of your next dump body.

Choose the proven Knapheide name for your next dump body purchase.

The Knapheide Manufacturing Company brings the next generation of van storage solutions to today's mobile contractors. With a comprehensive lineup of van equipment, including shelving, boxes and van partitions, Knapheide Van Equipment offers the rugged equipment, van packages and vocational packages to keep you working

The Z-DumpPRO™ is designed to maximize efficiency, so you can haul materials with confidence, and focus on profitability.

Specifications:
• Lengths: 9', 11'
• Capacity: 2-3 Yards, 3-4 Yards
• Sides: Rigid, Fold Down
• Side Height: 11", 16"

Standard Features:
• 2.5 Receiver Hitch on ICC Bumper
• 7-Way RV Trailer Plug
• 100% Powder Coat Finish
• 5-Year Limited Warranty (3 Year Powder Coat)

Z-DumpPRO™ Options:
• 2 LED Rear Strobes - Included with Elite
• Mini Light Bar on Self Leveling Bracket - Included with Elite
• Poly Fenders - Included with Elite
• Hand-Crank Tarp - Included with Elite
• Spring Return Tarp
• Steel, Aluminum, and Stainless Steel Underbody Toolboxes

The Z-DumpPRO™ Premier is designed to maximize efficiency, so you can haul materials with confidence, and focus on profitability.

Specifications:
• Lengths: 9', 11'
• Capacity: 2-3 Yards, 3-4 Yards
• Sides: Rigid or Fold Down
• Side Height: 11", 16"

Standard Features:
• 2.5 Receiver Hitch on ICC Bumper
• 7-Way RV Trailer Plug
• 100% Powder Coat Finish
• 5-Year Limited Warranty (3 Year Powder Coat)

Z-DumpPRO™ Premier Options:
• 2 LED Rear Strobes - Included with Elite
• Mini Light Bar on Self Leveling Bracket - Included with Elite
• Poly Fenders - Included with Elite
• Hand-Crank Tarp - Included with Elite
• Spring Return Tarp
• Steel, Aluminum, and Stainless Steel Underbody Toolboxes

An industry favorite service body paired with best-in-class towing. The StepMate™ bumper design allows workers to easily get the job done, while protecting their vehicle investment.

Standard Features:
• Length Options:
  • Steel: 98", 108", 132"
  • Aluminum: 104", 113", 137"
• 2.5 Receiver Hitch on ICC Bumper
• 7-Way RV Trailer Plug
• Complete Towing System
• Nitrogen Gas Strut Door Holders
• StepMate™ Bumper
• Steel and Aluminum
• 6-Year Limited Warranty (10 Year Aluminum)

ServicePRO™ Options
• Aluminum Rock Guards
• Compartment Lighting (Included with Elite and Premier) - Steel Only
• Top Packs - Included with Elite
• Spray On Bedliner: Bumper
• Spray On Bedliner: Tops of Compartments
• Spray On Bedliner: Complete Loadspace
• 2 LED Rear Strobes / 2 LED Front Grill Strobes
• LED Mini Light Bar

An industry favorite service body paired with best-in-class towing and lightweight protection.

The StepMate™ bumper design allows workers to easily get the job done, while protecting their vehicle investment.

Standard Features:
• Aluminum Top Packs
• Aluminum Tailgate Protector
• Power Locking System
• Compartment Lighting - Steel Only
• 2.5 Receiver Hitch on ICC Bumper
• 7-Way RV Trailer Plug
• Complete Towing System
• Nitrogen Gas Strut Door Holders
• StepMate™ Bumper
• Steel and Aluminum
• 6-Year Limited Warranty (10 Year Aluminum)

ServicePRO™ Options
• Aluminum Rock Guards
• Compartment Lighting (Included with Elite and Premier) - Steel Only
• Top Packs - Included with Elite
• Spray On Bedliner: Bumper
• Spray On Bedliner: Tops of Compartments
• Spray On Bedliner: Complete Loadspace
• 2 LED Rear Strobes / 2 LED Front Grill Strobes
• LED Mini Light Bar

An industry favorite service body paired with best-in-class towing and safety features.

The StepMate™ bumper design allows workers to easily get the job done, while protecting their vehicle investment.

Standard Features:
• Power Locking System
• 2.5 Receiver Hitch on ICC Bumper
• 7-Way RV Trailer Plug
• Complete Towing System
• Nitrogen Gas Strut Door Holders
• StepMate™ Bumper
• Steel and Aluminum
• Compartment Lighting - Steel Only
• 6-Year Limited Warranty (10 Year Aluminum)

ServicePRO™ Options
• Aluminum Rock Guards
• Compartment Lighting (Included with Elite and Premier) - Steel Only
• Top Packs - Included with Elite
• Spray On Bedliner: Bumper
• Spray On Bedliner: Tops of Compartments
• Spray On Bedliner: Complete Loadspace
• 2 LED Rear Strobes / 2 LED Front Grill Strobes
• LED Mini Light Bar

Reading’s Classic II™ aluminum service body combines the superior fuel economy and corrosion resistance of aluminum with Reading’s legendary quality and durability. Built with premium recycled aluminum alloy, the body is bathed in a zinc phosphate bath to prep it for improved adhesion of Reading’s durable powder coat finish, to resist corrosion better than any other service truck body on the market. It features all the standard and exclusive options that have made our flagship Classic II™ a leader in the truck body industry while offering environmental benefits that today’s consumers appreciate.

Standard features include a pressed diamond plate floor and inner tailgate surface, heavy-duty compartment doors and a rugged undercoated understructure for superior durability and strength. The Classic II™ aluminum service truck body also features Reading’s exclusive adjustable hidden hinges, Dual-Pro® door seals, a slam-action tailgate and much more. Add our industry-leading 10-year limited warranty and it’s easy to see why there’s No Body Better than the Classic II™.

There are many service bodies on the market, but there’s only one Classic II™. The Classic II™ steel service body, available for both single rear wheel and dual wheel chassis, is built with premium A60 coating-weight steel construction and our exclusive Triple Protection E-coat primer and powder coat finish to resist corrosion better than any other truck body on the market.

In addition, the Classic II™ offers features not found on any other service truck body. Our pressed diamond plate floor and inner tailgate surface provides superior strength and durability. Our patented hidden hinge system is fully adjustable and theft-resistant. Our exclusive Dual-Pro® seal system offers expanded door clearances and superior weather protection.

And that’s just the beginning. Add our industry-leading 6-year limited warranty and it’s easy to see why there’s No Body Better than the Classic II™.

The panel and tapered panel bodies offer interior work space with three or four full-length shelves on each side to provide carrying space for long-handled tools and equipment. In addition, they feature numerous exterior compartments with spring-loaded door holders on all vertical doors for ease of operation. Solid rear access doors lock securely with a two-point locking system.

Both the panel and tapered panel bodies are built on the Classic II™ service body and are available in heights of 50", 60" and 72". All models are available in fuel-saving aluminum or heavy-duty galvannealed steel. Panel and tapered panel bodies offer all the features you come to expect with a premium Reading truck body.

Reading’s SL service bodies feature the premium materials and quality construction Reading is famous for at an exceptional value. The SL is available in 98" single rear wheel, 108" and 132" dual rear wheel configurations. Both are available in standard and low-profile designs. You can get even more storage space with the Reading Spacemaker® option.

Every SL service truck body moves through our exclusive E-coat primer and powder coat finish process for outstanding rust and corrosion resistance. In addition, the SL service body offers numerous standard features and options, including Dual-Pro® door seals, an Aluma-Fill fuel cup, stainless steel rotary locks, a slam-action tailgate and much more.

Made in America and backed by our 6-year warranty, the SL service body offers unbeatable value.

Haul the maximum payload in the most affordable way while boosting fuel economy. A heavy-duty understructure, rugged steel floor and sidewall construction provide long-lasting durability for working in rugged jobsites.

Features:
• Two-piece HRA1011 steel floor plate is fully seam welded, and includes angled sidewalls to floor to eliminate “bridging” of material.
• Full-depth rear corner posts with flame-cut hardware, “banjo eye” chain holders and tarp tension bar receivers.
• With an adjustable linkage, the forward tailgate release allows you to dump loads from a safer and more convenient location at the front of the body.
• Heavy-duty steel hinges with grease fittings for lubricating.
• The drop-down tailgate release is operated with a single, fast-acting lever.

Whatever you need to haul, the Reading Marauder SL dump body can get the job done. The Marauder SL dump body was designed to provide the most economical means to maximize your payload and increase fuel efficiency. The heavy-duty understructure, rugged steel floor and sidewall construction and high-capacity hoist will give you a tough, durable and reliable dump body. It is available in 9’ and 11’ lengths.

Features:
• Two-piece HRA1011 steel floor plate is fully seam welded, and includes angled sidewalls to floor to eliminate “bridging” of material.
• With an adjustable linkage, the forward tailgate release allows you to dump loads from a safer and more convenient location at the front of the body.
• The drop-down tailgate release is operated with a single, fast-acting lever.
• Full-depth rear corner posts with flame-cut hardware, “banjo eye” chain holders and tarp tension bar receivers.

• Body Construction of A-60 Galvanized Steel Locks Out Rust and Corrosion
• Single Doors on Front Compartment for Enhanced Resistance to Water and Dust
• Weather Stripping for Dust and Water Resistant Compartment Interiors
• Rain Gutters Above all Doors
• Gas Springs on all Vertical Doors and Chain Stops on Horizontal Doors
• All Compartment Doors are Double Paneled
• Trademarked Recessed Stainless Steel Door Pockets with Internal Fasteners
• Top Lids Have (2) Gas Shocks and (2) Rotary Latches Each Mounted on Lid Ends
• Bright Tread Aluminum Diamond Plate Overlays on Top Lids
• Bright Tread Aluminum Front Gravel Guards and Splash Guards
• Lock-in-place Shelving, Adjustable on 2” Centers
• 13.5” High Self-leveling Tailgate with Shear Resistant Machined Hinges and Protective Stainless Steel Cap
• 12 Gauge Diamond Plate Floor on 10 Gauge Crossmembers
• Composite Fender Flares
• Zinc-plated Hinge Rods with Hinge Blocks
• Lighting Package Installed on Bumper Kick-plate
• 8” Rear Step Bumper
• Removable Trays
• Tie Downs in Bed Area
• Fortress 5-Point Locking System with Zinc Plated Lock Rods
• 1900 Emulsion Undercoating

The CROWN Service Body, with features comparable to most other manufacturers but built with Scelzi craftsmanship and legendary attention to detail.

• Three point latching system on all compartment doors
• Gas shocks on open top compartments and vertical doors
• All bodies equipped with a 6-inch step bumper, powder coated grey
• Stainless steel tubing around wheel well openings

The Signature Series is our Premium line of truck bodies, with upgraded styling and construction materials.

• Three point latching system on all compartment doors
• Gas shocks on open top compartments and vertical doors
• All bodies equipped with a 6-inch step bumper, powder coated gray
• Stainless steel tubing around wheel well openings

Scelzi Dump Truck Bodies are designed and manufactured with rugged durability for the toughest jobs. From the cross member supports to the welding techniques to the paint and finishing booth, a Scelzi Dump body is built to last for many years to come.

All Scelzi Dump bodies share certain features and traits, including:

• Standard body is painted white but black also available
• Solid sides are standard (DBS) but fold-down sides (DBF) is an option on smaller dump bodies
• gauge High-Tensile steel throughout body

Our Switch-N-Go ® dump body is available in seven standard lengths, from 8’ to 14’ long, as well as two build grades (standard & heavy duty). Dump bodies come manufactured with 2-way dump gates, with a variety of bulk heights (39”, 48”, or 51”) and capacities ranging from 2.2 up to 3.9 cubic yards. These open-topped dump bodies all come with our zinc prime & powder coated finish which is boosted by our triple stage wash to ensure proper curing and rust resistance. Options for our dump bodies include mesh tarp, contractor (fold-down) sides, coal chutes, extended board pockets, cab shields.

With the Switch-N-Go® hoist system, your crew can work safely at ground-level by unloading the body to the ground. Easily use hand tools and wheelbarrows in a safe and comfortable position. Dropping a body to ground-level also allows you to load equipment like track loaders, motorized dumpers into your work truck body for easy transport, and material handling. Learn more about the advantages of a hoist system paired with a detachable truck body, and see how to supercharge your productivity and your business opportunities.

Pro-Class Dump Body Features:
• Horizontal Lines and Gussets Have Smooth Rounded Corners for a Classy Modern Appearance
• Body Sides are Constructed of (2) Sheets of 10 ga Steel for Unsurpassed Strength and Durability
• Double Wall Sides Form a Fully Boxed Top Rail and Include 45º Sloped, Dirt Shedding Subrails
• The 94” Wide Body is Fully Welded and Made of 10 ga Steel Throughout
• Exclusive Quick-Latch® Tailgate Latching System Makes Tailgate Operations Simple and Easy
• The Body Understructure is Built with 3” Structural Steel Channels Spaced Every 12” and Supported by 5” Structural Channel Longitudinals
• High Lift Capacity Scissor Hoist with Factory Installed Body Prop is Standard Equipment

• 1/2" FRP Solid Bulkhead
• 12 Gauge Steel Flat Floor Frame
• 12 Gauge Steel Hat Section Cross Members on 16? Centers
• 10 Gauge Steel Floor Frame Rear Sill
• Galvanized Roof Bows on 16" Centers
• Insulated Ceiling w/ 3.4MM Luan Liner
• 2"x6" Shiplap Dense Pine Floor
• .032 Exterior Roof Aluminum
• .043 Exterior White Sidewall Aluminum
• 3/8" Plywood Sidewall Liner
• Extruded .125 Aluminum 3" Radius Corner Posts
• Extruded .125 Aluminum Roof Siderails
• .130 Aluminum Protective Rubrail
• Interior Dome Light with Switch
• Composite Roll Up Door
• Bottom Body Wrap
• Steel ICC Dock Bumper w/ Running Lights & Reflectors
• Rear Mud Flaps
• Complete Body Undercoating

• 3 Year Warranty
• 1/2" FRP Solid Bulkhead
• 1/2" FRP Side Walls
• 12 Gauge Steel Flat Floor Frame
• 12 Gauge Steel Hat Section Cross Memebers on 16" Centers
• 10 Gauge Steel Floor Frame Rear Sill
• Galvanized Roof Bows on 16" Centers
• 2"x6" Shiplap Dense Pine Floor
• .032 Extrior Roof Aluminum
• Extruded .125 Aluminum 3" Radius Corner Posts
• Extruded .125 Aluminum Roof Siderails
• .125 Aluminum Protective Rubrail
• Interior Dome Light with Switch
• Composite Roll Up Door
• Bottom Body Wrap
• Steel ICC Dock Bumper w/ Running Lights & Reflectors
• Rear Mud Flaps
• Complete Body Undercoating

• 3 Year Warranty
• 1/2” FRP Solid Bulkhead Wall
• 12 Gauge Steel Flat Floor Frame
• 12 Gauge Steel Hat Section XMembers on 16” Centers
• 10 Gauge Steel Floor Frame Rear Sill
• 2"x6" Shiplap Dense Southern Yellow Pine Floor
• 12 Gauge Steel Rear Door Structure
• Galvanized Roof Bows on 16” Centers
• .032 Exterior Roof Aluminum
• Aluminum Sidewall Frame Construction
• 1 1/2" Aluminum I-Beam Sidewall Studs On 16" Centers
• .043 Buck Riveted Exterior Aluminum Sidewall
• 3/8" Plywood Interior Sidewall Liner
• Extruded .125 Aluminum 3" Radius Corner Posts
• Extruded .125 Aluminum Roof Siderails
• .130 Aluminum Protective Rubrail
• Interior Dome Light with Switch
• Composite Roll Up Door
• Bottom Body Wrap
• Steel ICC Dock Bumper w/ Running Lights & Reflectors
• Rear Mud Flaps
• Complete Body Undercoating

CM’s welded aluminum service body maximizes payload and resists the corrosion that most commercial customers want to prevent in their work trucks. Our wide variety of options allows our fleet and commercial customers to have a body that fits their needs.

The evolutionary E-Tipper gives you all of the most desired features in a dump body - strength, value and style.

From the sculpted front and rear pillars to the one-piece seamless sides, to the western crossmemberless understructure, the E-Tipper combines good looks and durability with superior design.

Features can be added to create the most versatile body for your needs without custom leadtimes. Body options and accessories add function, are extremely economical and easy to order.

Every E-Tipper body is backed by Crysteel’s 5-year warranty.

The DuraClass Yardbird is the dump body of choice for contractors and municipalities who don't want to compromise on quality and durability. The Yardbird features our patented DuraClass design, with a continuous formed body sidewall and fully enclosed top rail for superior resistance to moisture and corrosion. Yardbird, like all DuraClass dump bodies, uses high tensile steel and fully welded construction for outstanding strength while saving precious weight.

The double-wall body side, a standard Yardbird feature, withstands punishing loads and always looks good. The full depth rear corner posts and enclosed front corner posts, plus our famous interlaced understructure give Yardbird uncommon strength and rigidity for a light duty dump body. Yardbirds come standard with quick release upper tailgate pins, 1/4 cabshield with window and heavy duty tailgate hardware. Choose from additional options including a crossmemberless understructure, drop sides, and stainless steel construction.

The DuraMag® Service Body is designed for continuous hard work with full length, heavy duty, long sills. What separates this body from the competition is the understructure; the difference is stunning. The general body construction is fully welded—never riveted or screwed together. Our proprietary door extrusions, coupled with compression latches and automotive bulb seals, produce the most watertight compartments available. The black polymer door latches are rivet-less for additional protection. All vertical compartments incorporate nitrogen struts to optimize performance in cold environments.

All DuraMag® bodies are fully powder coated. All lights are factory wired and installed. NEW Swing Door Locking System

Standard Features:
• All Aluminum (6000 Series) Understructure with Extruded Box Tube
• Swing Doors with Nitrogen Props on Vertical Compartments
• Extreme Duty (6000 Series) .625 Interlocking Extruded Aluminum Floor
• Welded Fender Flares for Superior Strength and Rigidity
• Option Colors Available:
• Black
• Red GM/Dodge Red and Ford Red
• 3/16 – Smooth Aluminum Compartment Tops and Inner Bed Walls
• Adjustable Shelving in Front, Middle, and Rear Compartments (one shelf with dividers in each compartment)
• Strongest Built Aluminum Service Body in the Industry
• Heavy Slam Latch Tailgate with Stainless Steel Lock Rods
• Black Polymer Rivetless Door Handles
• Fully Welded Construction – No Rivets, Screws, or Bolts to Come Loose
• Powder Coated – Standard: White
• LED Marker Lights (where required)
• LED Penny Light in Each Compartment
• LED Ultra-thin 6” Round Stop/Turn/Tail/Backup Body Lights
• Continuous Aluminum Piano Door Hinge
• Pass-through Panel between Front & Center Compartments
• Tread Plate Splash Guards on Front Wall – All Models
• Best 10 Year Warranty in the Industry

DuraMag® Aluminum dump bodies are recognized as Best in Class

The DuraMag Smooth Side Dump Body sports clean lines and a stylish appearance. The double walled sides allow for superior strength without the risk of interior impacts printing through to the outside.

High Performance in Commercial Use

DuraMag® Aluminum Dump Bodies are recognized as Best in Class: Stronger than your typical steel dump body with all the benefits of Aluminum: NO RUST, Eco-friendly, increased payload, better ride, approximately 10% fuel savings.

DuraMag® offers two versions of Dump Bodies to cover all your needs – the HD Smooth Side and Eco.

• HD Smooth – DuraMag’s most common dump body
• Eco – The DuraMag® Eco Dump Body is built for non commercial, lighter duty workloads

Bottom Line: DuraMag builds the bodies that save you money AND make you look good.

Specifications

• 3-8 Yard Capacity
• 3/16ga. smooth steel floor
• 3” structural channel cross sills on 16” centers
• 6” structural channel long rails
• 40” Bulkhead w/ slotted window
• ¼ Cab Shield, Tarp system ready
• HD Steel Sides w/ formed top rail
• HD Dump Gate, front release
• 3/16” smooth steel tail skirt w/ recessed marker lights
• Adjustable bolt on mud flap brackets
• Modular wire harness w/ recessed shock mounted sealed lamps
• FMVSS-108 lighting compliant
• Asphalt Automotive Undercoating
• Shot blasted, Iron Phosphate & steam pre-treatment
• High Gloss PPG Black Powder Coat Finish
• Complete mounting hardware kit w/ shear plates included

Dump Bodies come in a variety of styles. The steel dump is useful for carrying and dumping heavy cargo and it takes a good deal of abuse from materials such as rocks, gravel and dirt. This is also becoming more popular in aluminum to save weight and fuel, plus avoid the potential problem of corrosion.

The flatbed or stakebed dump can be very helpful for those who need a dump occasionally. The landscape dump body is a favorite with landscapers and generally is a flatbed with solid wood or steel sides and a swing away gate system at the rear. It is not meant for heavy items generally, but clippings, brush and similar materials. You can also get a dump body for a pickup truck, as either an insert or utilizing the truck bed as a dump.

Some of what Enoven offers.

The Galion 100U body is designed for superior service on 9900 -19500 GVWR cab/chassis'. The 100U features all 10 gauge high tensile steel floors, tailgate, head sheets and sides. Front corner posts, two intermediate side braces, full depth rear corner posts and boxed "material shedding" top rails are also standard.

This body is available in lengths of 8' to 11' in 1' increments. Inside width from side to side is 84".

Features:
• SIDES: One piece sides with no welded seams. 10 gauge A607 grade-50 high tensile steel with boxed top rail and fully welded boxed rear corner post. 6" side board gussets with full length rub rails, and box-type sidebraces.
• RUB RAILS: Full length 45 degree deflector panels are an integral part of the sides.
• FLOOR: 10 gauge two-piece high tensile steel floor with 2" floor to side radius. A607 grade-50 steel.
• FRONT WALL: 10 gauge high tensile A607 grade 50 steel. Full width integral inverted V-type horizontal bracing.
• TAILGATE: 3 Panel fully boxed 10 gauge high tensile A607 grade 50 steel with boxed horizontal reinforcements and sloping lower deflector. Tailgate is 6" higher than side.
• TAILGATE HARDWARE: Heavy duty: Standard upper hardware is offset cast steel hinge. Lower hook is cast steel: engages tailgate pin from top. Banjo eye keeps tailgate chain in position you select.
• LIGHTS & REFLECTORS: FMVSS 108 lights are standard, recessed for protection, rubber mounted and shock proof.
• UNDERSTRUCTURE: Completely jig built with 3" structural channel crossmembers on 12" centers and 5" structural channel longitudinal. Crossmembers are gusseted and welded to longitudinals.
• POPULAR OPTIONS: 36" cab shield, 8 gauge sides, 3/16" one piece floor, fold down 13" sides, 18" sides, quick release upper hardware, other options available.

From the glistening body finish to the Master Lock System designed to protect the tools of your livelihood, TradeMaster defines quality and value. If you are the best at what you do, why not drive the best? Harbor: Driven by the Best!

• Stainless Steel self-opening pop-top lids w/ body length compartment bins & 4" dividers
• Push Button locking system with red band locking indicator
• Modern gas shocks on each side opening door to keep them open during loading and unloading
• 8" deep recessed bumper for sure footing when entering bed
• Armless and self supporting tailgate work table
• Adjustable, but lockable, shelving system
• Weather shield system around locks, doors, and hinges, preventing leaks and securing the tools of your trade.
• Neoprene door seals, water-proof gaskets, self-sealing stainless steel rivets, and silky smooth three-point door latches with Teflon glides.

The General Service (GS) Package adds to the capability of the Plus packaging by adding an additional 4-drawer pack. Why not add yet 2 more drawer packs to improve the utility of storage for small components? Or add shelves to take advantage of the extra height? This is Harbor modularity at its best!

Plumbing Heating and Ventilation service technicians need to carry bottles of Nitro, CO2 or Brazing torch gases to pressure test systems, purge a system, blow out coils, or solder or repair lines. The PHVAC package is designed to satisfy your need with a 3-tank holder mounted off the rear shelf panel, four (4) drawer packs, and a lockable storage compartment for valuable components. How about adding a drop-down rack for your different size ladders that help you get to that system? Keep your tanks at 40 cu.ft. or less if you have to carry them up the ladder!

Standard Features:
• (2) Shelving Units on the Driver's Side with Drop In Dividers on the Second Shelf from the Top
• (1) Shelving Unit on the Passenger's Side with Drop In Dividers on the Second Shelf from the Top
• (2) 2-Drawer Pack on the Driver's Side
• (2) 3-Drawer Pack on the Passenger's Side
• (1) Hanger Hooks
• (1) Drop Down Door, creating a lockable compartment on the Driver's Side
• (1) Tank Holder for (3) 30 lb. tanks
• Partition

A stylish areodynamic body design, combined with high quality manufacturing for long lasting value. Built strong with 10 guage steel for the floor, front headboard and side panels.

Standard Features:

• 10 gauge steel front, sides and floor
• 12 gauge "double panel" tailgate
• 3" structural channel crossmembers (4.2 lbs./ft.) on approx. 13" centers
• Structural channel longsills
• Pro-Latch tailgate "quick release" system
• Slanted "double panel" tailgate
• Rounded (6" face) and rear (7" face) corner posts
• Tubular boxed top rail
• Dirt shedding rails
• Outboard-mounted spreader chain
• 1/4 cab protector(14")
• Plasma cut hardware
• Lo-mount design
• Shock / Recessed clearance lights per FMVSS

MASTERACK®’s strong and durable steel interiors are designed to handle the toughest applications. These high quality, heavy duty interiors have been the number one choice for many commercial fleets for more than 45 years. Cost effective and reliable, a MASTERACK® steel package will help keep fleets organized on the road for years to come.

The Rugby Eliminator LP is the hardest working dump body in the landscape and light construction industries. When landscape and construction contractors need a productive, reliable, and versatile body, they chose the Eliminator LP time after time.

The steel model features a seamless, one-piece steel floor for optimum strength and durability. Full 9-foot floor length allows for full sheets of plywood or other materials. The Eliminator LP design also features front pillars that incorporate forward facing clearance lights positioned at a 45-degree angle at each corner. Rugby products feature light locations that may assist the installer in meeting FMVSS/CMVSS 108.

Rugby's Titan Series Dump Bodies are designed to meet your bigger capacity, class 5-7 needs. Titans feature a sleek yet strong look, a dirt-shedding top rail, 10 degree sloped tailgate and radius front corner posts.

The Z-Spec Dump Body is designed to be multi-functional, from the integrated 3/4 cab shield to the patented rear EZ-Latch system. This body, with its sleek styling will give you many features not found on conventional dump bodies such as the standard 22" rear board pockets that make hauling the heavy or bulky loads a breeze.

All Zoresco bodies are painted on carts, so there is never a danger of overspray onto the chassis. Additionally, the fully boxed top rail on all sides and tailgate can be painted underneath, offering maximum coverage and protection.

Vertical braces are on the sides and the tailgate, and the side rails are at a 45 degree angle to shed dirt, keeping you and those around you on the road safe.

A once piece floor, radius sides and interlaced cross members complete the construction of the body. Lights are recessed in the rear posts which are flush with the tailgate.

The Z-Spec Dump Body built with existing Rugby technology, integrated with Zoresco Equipment company specifications and coupled with a Rugby hoist give you a combination that can't beat.

Shelf Staxx is a unique van shelving system constructed of alternative materials that minimally impacts the available payload for your commercial cargo van, enabling you to carry more. Unlike the competition, the base Shelf Staxx van shelving packages come equipped with a row of Sortimo S-Boxxes, which serve both as van drawers and mobile toolboxes, giving you more value and function. A variety of van storage bins, van accessories, van partitions, and van packages can be used in conjunction with Shelf Staxx van shelving for further customization.

Challenger ST truck service bodies are rugged, dependable mobile workstations.

These service bodies offer multiple compartments and large, open cargo space to provide generous storage and hauling room for all your work truck equipment. The storage compartments of Challenger ST service bodies come standard with material trays and can be further configured with optional drawer packages, hooks and additional trays to keep your work truck organized, so you can quickly locate tools and work more efficiently. To protect your assets from theft and the elements, these service bodies also offer convenient keyed-alike locks, double-panel steel doors with fully concealed bolt-on hinges and weather-tight seals.

Challenger ST service bodies are the classic choice of fleet managers and independent contractors alike for their tough galvanized steel construction, convenient storage and access, and extended years of service.

The Select Pro features an innovative body with flush-mounted doors and a Warner Bodies stainless steel concealed hinging system. With an aerodynamic rounded top, the industry leading Select Pro provides more storage, better security and improved durability at a value driven price.

The WEATHER GUARD General Service/Contractor Van Packages are specially designed to aid in streamlining van setup, providing a custom storage solution that works for you without the hassle of picking out products individually. The packages feature a pre-selected assortment of van accessories chosen specifically for basic jobs and worksites. These packages cater directly to general service providers and often include accessories such as a van bulkhead, adjustable van shelving, drawer cabinets, shelf doors, and Pack Rat pull out storage and accessories.

With the work van equipment, cargo van shelving, and other van products included in these comprehensive packages, you’ll be able to hit the road quickly to head to jobs, while making the setup of your commercial van interior convenient and painless. Additional van products are also available to create a more uniquely customized van solution.